It is to adhesion the plastic panel and aluminium panel in ACP production, which is the film made by special glue (high molecule) and multilayer PE films, the function of two sides of adhesion film are different, one side (smooth) is for the plastic panel and another side (frost) is for aluminium material. Adhesive film has strong adhesion with good durability, which can be used to adhesive all kinds of PE, PP, NYLON, Aluminium material and steel products.
Main usage for ACP multilayer holder and AL-PE composite pipes.
Adhesive Film are used everywhere. From more sophisticated materials used to stick under extreme conditions, there are many adhesive films on the market, and each is designed to meet specific needs.
There are wide range of adhesive film products, including those with general purpose permanent adhesive, and materials with removable adhesive.
Specifications
|
Process Conditions : Heating two sides at the same time, process temperature should be 125°-165° (Just for reference, it depends on your machine and the number of the rollers). |
|
Process Conditions : Heating two sides at the same time, process temperature should be 125°-165° (Just for reference, it depends on your machine and the number of the rollers). |
|
Adhesion time : 30 seconds |
|
Adhesion pressure : 4 kgs/ cm2 |
| Metal (aluminium) surface must be clear without any greasy dust, water or other impurity. |
| Remarks : Please test adhesive strength after half an hour when the adhesive film is used in production, and continue to use if the test result is standard. |
Features
| Thickness | - | - |
| Thickness | 0.05-0.06mm+0.005mm | 0.05-0.06mm+0.005mm |
| Width | 1250-2050+3mm | 1250-1600+3mm |
| the intensity of tensile | >15Mpa | >10Mpa |
| Ultimate elongation | 300% | 200% |
| the intensity of peeling off at the right angle | >35N/mm | >30N/mm |
| The intensity of peeling off 180 | >7N/mm | >5N/mm |